Non woven bag making machine is mainly used in the textile industry, which can process different specifications such as horse clip bags, handbags, leather bags, etc. What are the points we need to pay attention to when adjusting the non-woven bag making machine
1. Loosen the fixing flange of the transducer and adjust the air pressure to a lower level (about 2 kilograms).
2. Use air pressure to push the welding system so that the mold contacts the welding surface.
3. Use a very thin film, paper, or micrometer to check if there is complete contact between the top and bottom.
4. Gently tap the mold with a plastic hammer to ensure that the upper and lower contact surfaces are fully engaged.
